Used 20 mm NFM Twin Screw CRNI Compounding Extruder. Was reconditioned at NFM in 2003 with new parts, light use since then. Counter Rotating Non-Intermeshed screws. Variety of screws. Extruder Spec-HT 0.8" (20 mm) 212-121-21E1. Many type 2 barrels for feed or vent openings. May be plugged for type I. Eight twin bore barrels, One single bore barrel. 54:1 L/D Electrical heating elements on all barrels. Five temperature zones (heating/cooling). 10 HP motor and drive. Control cabinet attached on stand. Temperature controls. Drive motor set pot (up to 500 rpm). Ammeters. Power input 460V, 3ph, 60hz. Max draw is 50 amps. Unit is three feet wide by eight feet long by seven feet high. All vent openings have vent adaptors. Vacuum System-New water ring vacuum pump. 1.5 HP motor Pump Vacuum gage, flow meter, & adjusting valve Rated @ 15cfm @ 27"Hg Flow-0.9gpm Power use-230V, 3ph, 60hz; drawing 8 amps 5 gpm water required for exchanger cooling. Excellent Condition.

Item 11332-001