Used Luwa Thin Film Evaporator, Type LN 0050.  All product wetted parts type 316L stainless steel.  Heating surface 5.4 square foot.  Process area full vacuum to atmospheric.  Thermal section jacket: 100 psig @ 650° F. - hot oil.  Heating jacket type 316L stainless steel.  Heating flanges carbon steel.  Mechanical seal Crane type 109.   Rotor standard "N" design with lower bearing Pin, Dynamically balanced.  Spider: Standard.  Top bearing assembly: Standard.  Lower bearing assembly: Standard journal type with Pin Mounted in a centering support spider with a rotating graphite guide bushing mounted in the rear.  Rotor drive 3 hp 1800 rpm 3 phase 60 cycle 230/460 volt.  Condenser 65 square foot surface area, 12" shell, 85 tubes 3/4" X 4' long tubes on 15/16 triangular pitch. Tubes are 304 stainless steel balance is carbon steel.  Shell side rated 125 psig @ 300° F.  Tube side rated full vacuum to 15 psig @ 500° F.  Distillate pump Goulds pump Model 3196, size 1 X 1-1/2 X 6, 4-1/2" impeller cut.  Type 316 stainless steel for product contact parts.  Rated at 10 gpm at 95 ft head.  Distillate pump 2 hp, 3500 rpm.  Bottoms tank 8" X 12", carbon steel, jacket 100 psi/Full vacuum at 650° F.  Nash AHC-50 vacuum pump, cast iron with 3 hp 3 phase 60 cycle 1750 rpm 460 volt motor.  All skid mounted on carbon steel base.  Built 1981.

Item 10295-001