HomeRecently AcquiredRequest A QuoteReconditioned EquipmentStainless Tanks



Equipment Xchange LLC
309 Columbia Road
Hammonton NJ 08037

Phone 609 561 0500
Email sales@exllc.com
Ribbon Blenders
Used double ribbon blender 150 cuft capacity 50"" X 120"" carbon steel ribbon stainless steel trough. Jacketed trough. 40 hp motor 3 phase 60 cycle 230-460 volt 1180 rpm. Mfg by Day. Center bottom discharge. SN 82787A.
Item 11059-013  
Used ribbon blender approximately 100 cuft carbon steel. Double ribbon interrupted flight. 48"" X 84"" long. Center bottom discharge. Jacketed trough. Jacket rated 40 psi @ 650 degrees F. Gearhead 20 hp 3 phase 60 cycle 230-460 volt 155 rpm output to sprocket. Mfg by Young. SN 222. NB 19.  
Item 11059-006  

Used ribbon blender approximately 100 cuft carbon steel jacketed. Double ribbon interrupted flight. 40"" X 120"" long. Center bottom discharge. 20 hp motor 3 phase 60 cycle Link belt reducer output rpm 153.5 with sprocket providing approximately 22 rpm ribbon speed. Mfg by J H Day. SN 77973.
Item 11059-005  
Used ribbon blender approximately 100 cuft carbon steel. Double ribbon interrupted flight. Stainless steel shell, carbon steel ribbon. 40"" X 120"" long. Center bottom discharge. Jacketed trough. Requires motor and gearbox. J H Day SN 82786A.
Item 11059-004  


Used J H Day approximately 100 cubic foot carbon steel double ribbon blender. Trough 3' 6"" wide X 120"" long. Center discharge. Cover. Requires 25 hp motor 3 phase 60 cycle 230/460 volt 1740 rpm and a Faulk Reducer v belt driven.
Item 10977-002 
Used approximately 50 cubic foot working capacity stainless steel double ribbon blender. Approximately 30"" wide X 126"" long X 33"" deep. Motor with reducer to belt drive. 2 bottom outlets. Requires cover.  
Item 11386-001

Used approximately 40 cubic foot stainless steel double ribbon blender. Trough is approximately 32"" wide X 7' long X 35"" deep. Center bottom outlet 4"" flange. Requires motor and reducer, chain and sprocket drive. Hinged cover. Unit is jacketed on sides and bottom.
Item 11421-001 
Used Robinson Model 7 40 cu ft carbon steel double ribbon blender 30"" X 96"" long. Requires10 hp motor and drive. Serial number 2073. Center bottom discharge with valve. No cover.
Item 11059-027 

​Used 19 cubic foot stainless steel ribbon blender. Double ribbon, interrupted. Ribbon 1/4' wide x 1.5"". 24"" wide X 6' long X 27"" deep. 6"" Center bottom discharge outlet. 2 Piece Hinged cover. Dual cycle motor, 15 hp 3 phase 60 cycle 230/460v, 15 hp 50 cycle 200/400v 1455 rpm. Needs new gear train. 
Item 11351-001  
Company
Contact
Email
Phone

Address

Requirements

Used approximatley 1 cu ft stainless steel cantilevered ribbon blender. Stainless steel ribbon, trough and cover. 1 Hp motor 3 phase 60 cycle 1725 rpm motor with reducer and chain. Bottom outlet with manual valve.
Item 12822-002
Used approximatley 10 cu ft stainless steel ribbon blender. Double ribbon. Stainless steel contacts. Carbon steel jacket. Built by Howes. SN 108910. Center bottom outlet with manual valve. Hinged lid with counter weights.  
Item 12822-003  
Unused Scott Tender Blender Model 1060 - 10" wide X 60" long. This unit has 1.36 cu. ft. rated mixing capacity at 50% of the total agitator displacement of 2.73 cu. ft. Endplates are 1/4" thick and the trough is 1/4" thick. All welded construction with T316 stainless steel contact. Exterior of mixer is glass bead finish. T304 dimple jacket for cooling on trough. Interior welds of mixer are continuous and standard mill finish. Agitator is solid shaft with adjustable paddles. Cover section is hinged. Inlet 6" X 8" flanged. Shaft seasl are air purge packed gland seals. 2 Hp TEFC motor with gearbox and variable speed frequency drive, 3 phase 460 volt.  
Item 12234-001