To bid on equipment, please enter your contact information and bid amounts below, then click submit. Please read the terms and conditions for this bid sale below.

Questions? Contact us: 856-661-9393 or sales@exllc.com

*Company Name
*Contact Name
   Title / Position
   Street Address
   City
   State
   Zip Code
*Phone Number
  Fax Number
*E-mail Address

*Required Fields

ENTER BIDS IN WHITE BOXES BELOW

Minimum Bid: $2000	Used Dorr Oliver rotary vacuum filter. 12" diameter X 12" face. Approximately 3 square foot surface area. T316 Stainless steel contacts. Knife discharge into a repulper through. 3 Spray wash pipes. Drum driven by 1/4 3/60/220-440volt variable gear drive.  Item 10011-001 *As is, where is. See skidding charges below.
Minimum Bid: $1500	Used Day approximately 50 gallon stainless steel change can mixer, 4 blade. 316 stainless steel rotating can 28" X 20" deep. 5 hp motor. Item 11434-004 *As is, where is. See skidding charges below.
Minimum Bid: $2500	Used Overton GF Dryer/Flaker model #10. Double drum, chrome plated. Drums are 12" diameter X 18" face, rated 150 psig. On stand with feed and discharge hoppers and 2 hp vari-speed drive. Rated up to 150# of H2O removal per hour. Item 10415-002 *As is, where is. See skidding charges below.
Minimum Bid: $1500	Used BAC cooling tower model FXT 47 BACross Wet Deck Surface 47 ton cooling capacity. Galvanized housing 4' 6" wide x 7' 8" long x 7' 3" high. Rated 15,000 CFM airflow. Motor: 5 hp, 230/460 volt, 3 phase, 60 hz, 1745 rpm, 12.4/6.2 amp, usable at 208 volt 13.7 amp. Item 11218-002 *As is, where is. See skidding charges below.
Minimum Bid: $1000	Used Alfa Laval model 10BFG plate exchanger. 28 plates. Plate dimensions are 14.5" wide x 34" tall. Unit is 18-1/2" wide x 40" high x 40" long. Has 4 in. inlets/outlet nozzles. 61.2 square feet. Rated for 100 psi at 200 °F. Serial no. 9581. Item 11109-008 *As is, where is. See skidding charges below.
Minimum Bid: $1000	Used Engel injection molder Type ES80/25 ST. Druck pressure 2320 psi/160 bar. Built 1984. ASEA motor 7.5 kw 3 phase 60 cycle 1716 rpm, 480 volt. Item 11434-018 *As is, where is. See skidding charges below.
Minimum Bid: $400	Used Labconco Purifier class II, type A2 safety cabinet. Catalog # 36213-04. SN 223965. 115 volt 1 phase 60 cycle. Item 11356-003 *As is, where is. See skidding charges below.
Minimum Bid: $1000	Used FMC Case Palletizer Model EZY-150. The EZY-150 palletizes rows of cartons/cases. The maximum carton/case that the EZY-150 can palletize is 24" H X 24" W X 48" L and the minimum is 4" H X 6" W X 6" L. Unit is disassembled for shipment. **Photo is mfg stock, not actual unit. Item 11378-001 *As is, where is. See skidding charges below.
	Used Dukane Ultrasonic 210 plastic welder. 1500 watts. Includes Dukane Millenium 2150 dynamic process controller 32 bit RISC. New 1998. Item 11508-001 *As is, where is. See skidding charges below.
	Unused Pfaudler 3 blade retreat curve agitator for a 3000 gallon SA/RA series reactor, glass lined. With a 6 DTW drive end. Item 11275-005 *As is, where is. See skidding charges below.
	Used 3 blade retreat curve glass lined agitator for a 100 gallon clamped top reactor with a 2.5 DTW drive end. 44 1/4" long, 22" blade span. Item 11407-005 *As is, where is. See skidding charges below.
	Used Pfaudler 2 blade cryolock hub, glass lined. 3.5" diameter bore. 27" blade span. Dark blue glass. Item: 11407-015 *As is, where is. See skidding charges below.
	Used 3 blade retreat curve glass lined agitator for a 500 gallon 48" diameter clamped top reactor with a DTW drive end. 75.5" long. 46" blade span.  Item 11407-001 *As is, where is. See skidding charges below.
	Used cryolock glass lined agitator shaft for a 500 gallon clamped top reactor with a 5RW drive end. 102" long. Item 11407-007 *As is, where is. See skidding charges below.
	Used Hi Vac vacuum pump by Kinney. Model KC-5C. GE 1/2 HP motor, 1 phase, 115/230 volt, 1725 rpm, 60 cycle. Item 11434-113 *As is, where is. See skidding charges below.
	Used Busch vacuum pump. Rotary vane. Model RC0250. 174 cfm. 10 hp.  Item 11367-004 *As is, where is. See skidding charges below.
	Unused centrifugal pump size 3X1.5H-13/120. Mark II, High Silicon Iron pump. 1800 rpm. Alloy D51M. Built by Durco. Requires motor.  Item 11407-013 *As is, where is. See skidding charges below.
Minimum Bid: $500	Used Abbe stainless steel mixer, 25 gallon capacity. Vacuum internal. Jacketed 50 PSI at 400 degrees F. Shell rated 50 PSI at 400 degrees F. Under driven. Clamped dished top. Dished bottom. Mounted on stand. 10 HP, 3 phase, 60 cycle, 1730 rpm, explosion proof. Item 11434-003 *As is, where is. See skidding charges below.
Minimum Bid: $250	Used Environmental Tectonics Autoclave Model 2501 Single Door 25 X 25 X 40. Cart is 24" wide X 22" high X 34" long. Stainless steel, carbon steel steam jacket. Shell and Jacket rated 40 psi at 300 degrees F. Built 1989. National board 154. SN 101060. Item 11333-001 *As is, where is. See skidding charges below.
Minimum Bid: $1500	Used Getinge Clean Steam Autoclave model P27 91415 ARB2 35 X 57 X 60. Chamber 45 psi @ 300 degrees F. Jacket rated 45 psi @ 300 degrees F. Power 3 phase 60 cycle 480 volt.  Item 10944-001 *As is, where is. See skidding charges below.

   

Questions? Contact us: 856-661-9393 or sales@exllc.com

Terms & Conditions:

All items are sold "as is".  All items are subject to prior sale or other disposition.  All Bids are subject to review and acceptance. All items sold are subject to Equipment Xchange LLC normal terms and conditions.  All bids in US dollars.

 

Payment:

All items must be paid for prior to shipment, (cleared funds), unless other arrangements have been made with Equipment Xchange LLC.  Payment can be made via, Cash, Company Check or PayPal.

 

Inspection:
All items are available for inspection.  Contact Equipment Xchange LLC at 856.661.9393 or sales@exllc.com for arrangements.

 

Loading Fees: None

Skidding: $100

Crating: Call for Quote

 

Buyers Premium: None